How To Set Up Your Wireless Transmitters
Included in every wireless transmitter kit are a matched pair of transmitter and receiver. The transmitter plugs into the camera, sending the video feed wirelessly to the receiver plugged into the monitor. This eliminates the hassle of installing a long wire the length of the vehicle to connect camera to monitor.
Plug the yellow RCA wire on the transmitter to the yellow RCA of the camera.
Plug the red DC power plug on the transmitter to the red DC power plug on the camera.
Connect the bare wires to a 12V power source. First the black negative ground, then the red positive 'hot' wire. Depending on your vehicle and preferences, this may be a constant power source, running light, or reverse light.
Plug the yellow RCA wire on the receiver to the yellow RCA video input on the monitor. (If your monitor has multiple yellow plugs, use the one marked 'AV1' or 'CH1')
Plug the red DC power plug on the receiver to the red DC power plug on the monitor.
Connect the black and red bare wires from the monitor to a 12V power source. This can be wired directly into a source inside the dash, or to our optional cigarette lighter adapter.
Alternatively, a 'pigtail' adapter is included, which has a DC power plug on on end and red/black bare wires on the other.